Inductor Application Videos
see attached manufacturers’ videos on applications and selection guidelines
How do I select the right inductor for a DC/DC converter design?
Würth Elektronik practice-oriented webinar explains the selection of suitable inductors for a DC/DC converter design.
45 min
Influence of a Common Mode Choke to the Noise on the Data Line
Würth Elektronik shows how a CMC is able to reduce the noise on a real application using the EMC noisy box
3 min
Wireless Power Transfer Explained
Würth Elektronik webinar on Wireless Power Transfer – Advanced Coil Knowledge
48 min
Characteristics of High Current Inductors in a Point-of-Load Converter
Würth Elektronik webinar discusses thermal considerations of high current inductors
21 min
Selecting the proper Inductor with Simulation Tools
Würth Elektronik explains how easy it is to calculate the inductor for a DCDC buck converter and also the total losses for this inductor by using its REDEXPERT
5 min
Selecting the proper Inductor for LED driver
Coilcraft explains LEDs and driver circuit requirements that impact inductor selection.
2 min
ClassD inductors Explained
Würth Elektronik webinar ‘ClassD inductors – what is the difference to normal power / filter inductors?’
34 min
What’s better… An assembled or a molded inductor?
KEMET explains the difference between the two and see what would work better in specific applications.
3 min
Power Inductor for Buck & Boost Application & Noise Reduction
KEMET video about switching regulators noise mitigation using inductors
32 min
Calculating the Best Power Inductor Solution
KEMET webinar how to find the best inductor solution
29 min